Assembly instructions:

1. Carefully unpack lamp from the box,assemble lamp in a flat and clean surface.It is important that the light bulb in your lamp base be completely centered and tightened.Make sure that the lamp is unplugged before touching.

2. Position body on the base and make sure it is steady.

3. Place cap on top of the bottle to complete.

4. Plug in and turn switch on.

Use only 25 Watt R39 bulb for replacement bulb.

Care and operation:

. Motion lamp is designed to operate in an average room temperature (20-25℃),Make sure motion lamp is at room temperature before starting.And always operate the motion lamp on a firm stationary surface.Don't operate lamp on any warm or hot surfaces.

. Initial warm-up of motion lamp will take 2-3 hours.Subsequent warm-ups will take less time depending on room temperature.Motion lamp's function will be achieved fully after lamp has been used 5 or 6 times.

. Do not add any fluids or solids to your lamp.The air space at the top of the vessel has been provided to allow for expansion.

. Do not place near sources of heat or cold such as heat and air conditioning vents.Always operate lamp only on room temperature surfaces.Operation or storage of lamp in direct  sunlight will cause colors to fade.

. Motion lamp operates at a very warm temperature and the vessel is made of glass.Operate out of reach of small children and pets.

Caution:

. Use only R39,25W appliance bulb for replacement bulb.Variance in bulb size or watt will produce unsatisfactory operation.

. When motion lamp is in operation,be sure not to move or shake it in order to avoid liquid becoming murky and permanently damage.

. Motion lamp should never be heated up by any other means.Nor should it be cooled down artificially.Not be used when the vase is cracked or damaged.

. The space on the  top of vase is provided for expansion.Do not break the seal of cap to fill it with liquid or solid.Breaking the seal will void your warranty and ruin the product.